portable microphone booth

The Primacoustic IsoTools VoxGuard is a high performance ambient noise attenuator designed to mount on a microphone stand & surround a recording microphone to help control the sound from entering the microphone by minimizing the reflections in the room. Made from light weight, highimpact ABS plastic with a high-density open cell acoustic foam liner. The VoxGuard fits onto a mic stand using the mic clip to hold it in place.

CHECK PRICE NOW!
Read Full Review >>

After 3 years and many poor imitations of sE Electronics now industry standard design, sE Electronics have gone back to the drawing board to produce what many budget concuss customers have so desired… an entry level Reflexion Filter product which actually does the job properly! Due to patents pending on sE Electronics original design, competitors who have tried to emulate the success of the original RF Pro have not managed to do so successfully since their designs are limited, and as a result, so are their performances. The Project Studio RF uses the same basic design as the Pro version, and while it can never be fully as effective as its more expensive big brother, it easily outperforms copies and for project studio use is just the job. The metal frame is lined with the same-patented polyester fiberboard as the Pro version uses for its outer layer. This material has extremely good acoustic absorption properties; much better than simple foam products. This is then further lined with a high density ‘crystal’ foam with curved undulations rather the cheaper and less effective ribbed, medium density foams that are widely used by other companies.The result is a product which looks fantastic and ‘sounds’ even better when recording vocals and acoustic guitars… its not an RF Pro, but it’s the best of the rest!

CHECK PRICE NOW!
Read Full Review >>

The SE Electronics Reflexion Filter is a great way to take out problem ambience with out all the expense of acoustically treating a room. The Reflexion Filter envelopes the rear of the microphone to produce a smooth, drier sound and reject unwanted reflections. The Reflexion Filter is perfect for a home studio with out acoustic treatment or a performer that also has to operate the recording device. The Reflexion Filter also works very well on an instrument that requires a dry, accurate sound. SE Electronics Reflexion Filter Features An incredible tool for home studios or for recording in the Control Room Adds that extra polish to your recordings by starting at the source Removes problem ambience without acoustically treating a room Rear of the mic is isolated producing a smooth, drier sound Excellent for live or studio; vocals, instruments, amps and percussion An included variable position, stand clamp assembly allows you to attach the Reflexion Filter to any standard microphone stand. The Reflexion Filter has 6 main layers. Firstly, a strong layer of punched Aluminium which allows sound waves to pass through it, diffused, to a layer of absorptive wool. The sound waves then hit a layer of Aluminium foil which helps dissipate energy and break up the lower frequency wave-forms, and from here they hit an air space kept open by rods passing through the various layers. The air gap acts as an acoustic barrier. The sound waves then pass to a further layer of wool and then through an outer, punched, Aluminium wall which further serve to absorb then diffuse the remaining acoustic energy. The main absorber has 4 formed pieces of state-of-the-art specialist acoustic absorptive material attached to its face via the extended separation rods, which further serve to absorb and then diffuse the sound waves as they pass to the main filter. The stand assembly comprises a mic stand clamp fitting, which attaches by means of a vertical joint to the horizontal bar assembly onto which bot

CHECK PRICE NOW!
Read Full Review >>

The patent-pending, interlocking MAX-Wall acoustic treatment system is made to grow and grow as your needs change… it can just go on and on and on, but only if you need it to. Don’t buy more than your place requires… and don’t bankrupt your pocketbook when a simple MAX-Wall system might be all you need! You want modular? MAX-Wall’s your answer.The MAX-Wall’s perfect if you’re renting a space and don’t want to-or aren’t allowed to – mount anything to your walls, or if your place needs to serve a variety of acoustical purposes. MAX-Wall offers you great flexibility in a big hurry. The MAX-Wall is very absorptive, even at low frequencies. It offers great broadband absorption and is incredibly linear, with an overall NRC of 1.05! In our own use and testing, we’ve been amazed at its effectiveness. We ultimately concluded that you get great absorption because all sides of the MAX-Wall panels are exposed, thus doing double – duty. The MAX-Wall’s proprietary, patent-pending design offers excellent broadband control of sound waves throughout your room AND in the near field, so now you can play, record or mix great music or vocal tracks ANYWHERE at ANY TIME!

CHECK PRICE NOW!
Read Full Review >>

After years of trying to get good audio in acoustically untreated spaces and trying all the tricks – building pillow forts, hanging blankets on the wall, huddling in mid-summer under a thick comforter reading copy by a keychain flashlight – I decided I had to come up with some kind of easily transportable sound booth for on the road recording. The original Porta-Booth® was the result. Since then I’ve gotten lots of requests for a bigger, more robust booth that could be used as a permanent and portable recording solution – accommodating larger and longer microphones and lengthy scripts. After hours of conversations with audio pros and over a year of prototyping – testing more than a dozen designs – I’m very proud to introduce the purpose-built: Porta-Booth Pro® a professional quality sound studio with the audio quality you’d expect from a human-sized sound booth at a fraction of the size and cost because you don’t need to be inside a sound booth – your microphone does!

Now improved!
New! Larger LED that uses easily replaceable AAA batteries
New! Larger ‘articulated’ clip to securely hold your script
New! ‘Anti-sway’ strap for those who mount their Pro’s on a boom-arm mic stand.
New! A thicker bottom for more stability and re-spec’d side walls so the audio is even smoother and keeps even more ambiant noise out!

CHECK PRICE NOW!
Read Full Review >>